- MIL-DTL-32139 Nanominiature Connectors
- MIL-DTL-83513 Micro-D Connectors and Cables
- MIL-DTL-24308 Type D-Subminiature and HiPer-D Filter Connectors
- HiPer-D® Connectors and Accessories
- Micro-Crimp Connectors and Accessories
- QPL Hermetic MIL-DTL-24308 Connectors
- ARINC Filter Connectors
- AlphaLink PC Board Connectors and Jumpers
MIL-DTL-32139 Nanominiature Connectors
Now available from Glenair: Nanominiature circular and retangular connectors. The smallest and lightest mil-spec connector in the
MIL-DTL-83513 Micro-D Connectors and Cables
The Glenair family of TwistPin equipped Micro-D connectors offer outstanding mating performance, durability and minimal contact resistance. Micro-D Connectors feature High density micro TwistPin contacts set on .050 centers in arrangements from 9 to 130 contacts. They are available with insulated and uninsulated wire, PCB, solder cup and flex terminations and are supplied as QPL or commercial variations. Our Micro-D connectors provide a solution to meet your high-performance requirements including high temperature and hermetic applications and are in stock and available for immediate same day shipment.
MIL-DTL-24308 Type D-Subminiature and HiPer-D Filter Connectors
EMI/EMP Filter Connectors / Section E
MIL-DTL-24308 intermateable filter connectors with advanced environmental/shielding performance
The Glenair Series 28 HiPer-D connector is intermateable and intermountable with standard M24308 type D-Subs, and meets the need for improved performance in hostile environments. Unlike standard M24308 connectors with stamped steel shells, the HiPer-D is precision-machined from aluminum or stainless steel. The dielectric inserts are made with thermoset epoxy for improved resistance to chemicals and are capable of withstanding 200°C continuous operating temperature. Aerospace-grade fluorosilicone grommets and face seals provide watertight sealing. Integrated grounding fingers provide superior electromagnetic compatibility. Best of all, the HiPer-D is available in every standard and high-density M24308 layout as well as combo layouts integrating power and shielded contacts. Like all Glenair high-performance solutions, HiPer-D is stocked for immediate same-day shipment.
HiPer-D® Connectors and Accessories
High-Performance M24308 Intermateable D-Sub Connectors — Series 28
The Glenair Series 28 HiPer-D® connector is intermateable and intermountable with standard M24308 type D-Subs, and meets the need for improved performance in hostile environments. Unlike standard M24308 connectors with stamped steel shells, the HiPer-D® is precision-machined from aluminum or stainless steel. The dielectric inserts are made with thermoset epoxy for improved resistance to chemicals and are capable of withstanding 200°C continuous operating temperature. Aerospace-grade fluorosilicone grommets and face seals provide watertight sealing. Integrated grounding fingers provide superior electromagnetic compatibility. Best of all, the HiPer-D® is available in every standard and high-density M24308 layout as well as combo layouts integrating power and shielded contacts. Like all Glenair high-performance solutions, HiPer-D® is stocked for immediate same-day shipment.
Micro-Crimp Connectors and Accessories
The High-Performance Rectangular with Advanced EMC and Environmental Performance — Series 79
Meet the newest member of Glenair’s Micro-D family, the Series 79 Micro-Crimp. The Micro-Crimp connector features crimp, rear-release size #23 contacts on .075 inch (1.9 mm) spacing, as well as size #12 and #16 power and coaxial crimp contacts in a range of hybrid layouts. Available in 31 insert arrangements, the Micro-Crimp provides a wide selection of arrangements for data and power transmission.
Today’s defense/aerospace systems require advanced levels of environmental protection, electromagnetic shielding and size/weight reduction. The Series 79 was developed to meet these needs. Panel mounted connectors feature conductive sealing gaskets. Right angle printed circuit board connectors have an EMI shroud to prevent electromagnetic interference. Wire sealing grommets and interfacial seals protect circuits from moisture and contamination. Series 79 plugs are available with auxillary EMI springs for superior EMC performance.
QPL Hermetic MIL-DTL-24308 Connectors
Hermetic Connectors — Section J
Glenair MIL-DTL-24308 D-Subminiature hermetic connectors are high density, compact connectors suited for use in rack and panel, cable to panel and cable to cable applications where an airtight seal is required. Front- and rear-mount shell styles are available with both solder cup and eyelet contacts in six shell sizes for maximum design flexibility. Because Glenair makes all its hermetic connectors in-house, including the machining of shells, molding of interfacial seals and firing of hermetic components, we can offer you outstanding availability on stock products and fast turnaround on special orders.
ARINC Filter Connectors
EMI/EMP Filter Connectors / Section H
Glenair manufactures a full range of ARINC 600 filter connectors for use in EMC/EMP management of electronic systems and interconnect cabling. All connectors are designed in accordance with the ARINC 600 specification, and are designed to mate with ARINC 600 plugs with the same insert configuration and opposite contact gender. Planar filter arrays and TVS diodes may be integrated into both standard catalog as well as build-to-order configurations. Glenair’s state-of-the-art diode burn-in process tests leaded and surface mount diodes with leakage current monitored throughout the entire test procedure ensuring field reliability.
AlphaLink PC Board Connectors and Jumpers
Spring-Loaded Solderless Contact — Series 171
AlphaLink is an innovative high-performance printed circuit board connector built on .050″ center-to-center contact spacing with spring-loaded board contacts and flex, wire, or solder cup terminations. Spring-loaded contacts interconnect directly to board pads and circuits to effect an ultra-low-profile and lightweight solution. Direct connection to the board eliminates a mating connector half and makes for easier and faster board preparation and masking. On the termination side, AlphaLink connectors are equipped with either PC tail, pre-terminated wire pigtails, or solder cups for complete versatility in flex circuit or conventional wire termination. AlphaLink may be ordered as a discrete connector or in turnkey jumper configurations paired with Glenair I/O connectors, including Series 80 Mighty Mouse, Series 88 SuperFly, Series 79 Micro-Crimp™, Series 89 circular and rectangular Nanominiature, and our mil-qualified 83513 (MWDM) Micro-D connectors.